home *** CD-ROM | disk | FTP | other *** search
- STANDARD MICROSYSTEMS CORPORATION
-
- Microsoft Windows NT v3.1 NDIS v3.0 Driver
- For Ethernet LAN Adapters
-
- INSTALLATION GUIDE
-
- This software is licensed by SMC for use by its customers only.
- Copyright (c) 1993 Standard Microsystems Corporation.
- All rights reserved.
-
-
- This installation guide describes:
-
- o How to use EZStart to copy the Microsoft Windows NT version 3.1
- NDIS spec 3.0 driver from the SuperDisk to your PC.
-
- o How to install the driver.
-
- Note: This driver supports all 8216 (Ultra) and 80xx (PLUS)
- Series ISA and Micro Channel Ethernet adapters.
-
-
- COPYING THE DRIVER FILE
-
- From the EZStart Driver Installation screen, select 'Copy Files'
- to copy all the files used by this driver from the SuperDisk to
- the Destination Directory recommended by EZStart, or to a different
- directory that you specify.
-
- The EZStart default Destination Directory is A:\. Please make
- a backup copy of your SuperDisk before EZStart copies files to the
- SuperDisk to create an installation diskette.
-
- Note: If you change the Destination Directory, make sure that the
- DISK.ID file is in the root directory of the disk that you
- are using, and that the OEMSETUP.INF and SMC8000.LAN files
- reside in the root directory or a subdirectory on the disk
- you are using.
-
-
- INSTALLING THE DRIVER
-
- 1. Use EZStart to test and configure your Ethernet adapter. Make
- sure you write down your Ethernet adapter IRQ, I/O Base, and
- RAM Base settings.
-
- 2. Boot your computer from Windows NT.
-
- 3. From the Program Manager's "Main" window, double-click on the
- "Control Panel" icon.
-
- 4. Double-click on "Network". The Network Settings dialog box
- appears.
-
- 5. Select "Add Adapter".
-
- 6. Select "<Other> Requires disk from manufacturer".
-
- 7. Select "Continue".
-
- 8. When prompted, insert the SuperDisk.
-
- 9. Type the Destination Directory where EZStart copied the
- driver files (for example, A:\WIN_NT). If you are not
- sure where the Destination Directory resides, look for
- the SMC8000N.SYS file. This file was one of the files
- copied by EZStart to the Destination Directory. When you
- find the directory where this file resides, you will have
- found the Destination Directory.
-
- 10. Select "OK".
-
- 11. When the next dialog box appears, select the SMC Ethernet
- adapter followed by "OK".
-
- 12. Choose the IRQ level, memory base address, and I/O port
- address. Refer to the information you wrote down in step 1.
-
- 13. When the next two dialog boxes appear, select "OK" for
- each one.
-
- 14. Shutdown and reboot your computer.
-
- In the unlikely event you encounter any device driver errors
- after Windows NT boots, check the event log in the
- Administrative Tools icon to see whether the error is related
- to your network adapter.
-
-
- SMC and Standard Microsystems are registered trademarks; and EtherCard
- Elite 16 Ultra, EtherCard Elite 16T Ultra, EtherCard Elite 16C Ultra,
- Elite Series, EliteView, EZStart, SuperDisk, and UltraChip are
- trademarks of Standard Microsystems Corporation. Other products and
- company names are registered trademarks or trademarks of their
- respective holders.